Setting HDMI AUDIO
You can set HDMI audio settings.
Before using!
Press the INPUT MODE button to select HDMI or HDNI2. (see page 19)
•
If you select Digital (Optical, Coaxial) or Analogue, the HDMI audio setting will be
•
deactivated.
REMOTE CONTROL
1
2
3
To exit setup mode
•
Wait for about 5 seconds or press SETUP/MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Setting HDMI AUDIO
AVR : Audio is played on this product.
•
TV : Audio is played on a TV connected to the HDMI OUT jack and no audio is
•
played on this product.
28
√
Press SETUP/MENU button, and then press ENTER
button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
Press
button to select the "HDMI AUDIO", and then
press ENTER button.
"HDMI : AVR" appears on the display.
Press
...†
button to set the HDMI audio.
Each time you press this button, HDMI : AVR
HDMI : TV will be selected
•
in turn.
•
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
2
Press FUNCTION button to select the "HDMI SETUP".
3
Press SURROUND button.
"HDMI : AVR" appears on the display.
•
4
Press SELECT(
) button to set the HDMI audio.
,
Each time you press this button, HDMI : AVR
HDMI : TV will be selected
•
in turn.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
•
"SETUP OFF" appears on the display and Setup Mode is exited.
This function is available when both video input and output are all HDMI.
•
•
HDMI AUDIO setting is available only when the HDMI output is
connected to a TV.
If you couldn't hear sound from the TV, you should change the HDMI
•
audio output setting for DVD PLAYER and SAT to PCM.
GB
29