Setting The Speaker Mode - Samsung HT-AS710 Instruction Manual

Digital surround av receiver system
Hide thumbs Also See for HT-AS710:
Table of Contents

Advertisement

Setting the speaker mode

Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration
and whether certain speakers are used or not.
REMOTE CONTROL
1
2
3
4
5
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Using the SPK SELECT button
1 Press SPK SELECT button to select the speaker you want.
Each time you press this button, FRONT
SUB
2 Press
the selected speaker.
3 Repeat steps 1-2 to set the mode for each speaker.
To turn the SUBWOOFER on or off.
Press SUBWOOFER button on the remote.
Each time you press this button, SUB : YES, SUB : NO will be selected in turn.
20
Press SETUP/MENU button, and then press ENTER button.
"SETUP MODE" appears on the display and goes into Setup Mode.
Press
button to select the "SPK SETUP", and then
press ENTER button.
Press
button to select the speaker you want.
Each time you press this button, FRONT
CEN
SURR
CROVR will be selected in turn.
...†
Press
button to set the mode (Large, Small etc.)
for the selected speaker.
Repeat steps 1-2 to set the mode for each speaker.
CEN
SURR
CROVR will be selected in turn.
...†
button to set the mode (Large, Small etc.)
If FRONT is set to LARGE, you can select YES or NO for SUB.
If FRONT is set to SMALL, SUB is automatically set to YES.
NO cannot be selected.
SBACK
SUB
SBACK
for
Setting the Speaker
SPEAKER
FRONT(Front)
CEN(Centre)
SURR(Surround)
SBACK (Surround Back)
SUB(Subwoofer)
CROVR
(Crossover Frequency)
MAIN UNIT
1
Press SETUP button.
"SETUP MODE" appears on the display and goes into Setup Mode.
2
Press FUNCTION button to select the "SPK SETUP".
3
Press SURROUND button to select the speaker you
want.
Each time you press this button, FRONT
SUB
CROVR will be selected in turn.
4
Press SELECT (
,
selected speaker.
5
Repeat steps 3-4 to adjust each speaker.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Possible Settings
Default Setting
• LARGE : Select when using large speakers You can listen to full
LARGE,SMALL
SMALL
range sound.
• SMALL : Select this when using small speakers
LARGE,SMALL,NONE
SMALL
• NONE : Select when you use no speaker.
LARGE,SMALL,NONE
SMALL
• YES (subwoofer) : Select when using the subwoofer speaker.
LARGE,SMALL,NONE
SMALL
• NO (subwoofer) : Select when not using the subwoofer speaker.
YES,NO
YES
• CROVR : Select the crossover frequency for the best bass response
60,80,100,120,
in your room.
150Hz
150,180,200(Hz)
GB
CEN
SURR
SBACK
) button to set the modefor the
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Av-r710

Table of Contents