Setting the Speaker Mode
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Frequency response from the speaker will be adjusted according to your speaker configuration and whether
certain speakers are used or not.
19
REMOTE CONTROL
1
Press SPK SEL. button to select the speaker you want.
Each time you press this button, F.SPK
•
SW SPK
CROVR
2
Press ...† button to set the speaker mode.
To Exit Setup Mode
Wait for about 5 seconds or press the SPK SEL. button of the remote control to
•
select SPK MODE OFF.
To turn the SUBWOOFER On or Off.
Press SUBWOOFER button.
Each time you press this button, SW SPK : YES, SW SPK : NO will be selected in turn.
•
If F.SPK is set to 'SMALL', SW SPK is automatically set to 'YES'.
•
If S.SPK is set to 'NONE', SB SPK is automatically set to 'NONE'.
•
You cannot use Speaker Setup Mode in 5.1CH MULTI CH function.
•
√
C.SPK
SPK MODE OFF will be selected in turn.
S.SPK
SB SPK