Setting The Clock; Timer Function; Cancelling The Timer - Samsung MX-E750 User Manual

Setting the Clock

For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
( ) button.
2. Press the TIMER SET button and then press the
ENTER button, "CLOCK" is displayed.
( )
3. Press the ENTER
(
• Increase the hours: ,
• Decrease the hours: .
4. When the correct hour is displayed, press the
ENTER button, the minutes flashes.
( )
• Increase the minutes: ,
• Decrease the minutes: .
5. When the correct minute is displayed, press the
ENTER button, " TIME" appears in the
( )
display.
• The current time is now set.
• You can display the time, even when you are using
another function, by pressing the TIMER SET button
once.
• You can also use ] or [ on the front panel instead
of TUNING/ALBUM , or . button in step 3,4.

Timer Function

The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, check that the current time
is correct.
• For each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
• If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
Example: You wish to wake up to music every morning.
1. Switch the system on by pressing the POWER (
button.
2. Press the TIMER SET button until
3. Press the ENTER
(
Result: ON is displayed for a few seconds, you can
set the timer switch-on time.
4. Set the timer switch-on time.
a Press the TUNING/ALBUM , or . button to
set the hours.
Press the ENTER (
b
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to
set the minutes.
d Press the ENTER (
Result: OFF is displayed for a few seconds, you can
now set the timer switch-off time.
5. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to
set the hours.
b Press the ENTER
Result: The minutes flash.
button, the hour flashes.
)
TIME is displayed.
button.
)
) button.
) button.
button.
( )
c Press the TUNING/ALBUM , or . button to set
the minutes.
d Press the ENTER
Result: VOL XX is displayed, where XX corre-
sponds to the volume already set.
6. Press th
e TUNING/ALBUM , or . button to adjust
the volume level and press the ENTER (
Result: The source to be selected is displayed.
7. Press th
e TUNING/ALBUM , or . button to select
the desired source to be played when the system
switches on.
If you select...
FM/AM (radio) ........... a Press the ENTER (
CD/MP3 (compact di s c) .......Load one compact disc.
USB1/USB 2 .............Connect the USB device.
8. Press
the ENTER (
Result: CHKREC (Do you want to record?) is displayed.
9. Press
the ENTER (
Result: REC N is displayed, you can press the TUN-
ING/ALBUM , or . button to select the REC Y or
REC N, and then press ENTER (
1) If you select the REC N, it will cancel tuner timing
recording even if you have already set the tuner timing
recording.
2) If you select the REC Y, you can set the tuner timing
recording.
a. Press the ENTER (
Result: ON is displayed for a few seconds, you can
set the tuner timing recording switch-on time.
b. Press the ENTER (
Result: OFF is displayed for a few seconds, you can
set the tuner timing recording switch-off time.
• The maximal tuner timing recording time is 5 hours.
• If the timer switch on and off times are identical, the word
ERROR is displayed.
• You may use ], [ buttons on the main unit to instead of
the TUNING/ALBUM , or . button to adjust in step 4 to 9.
• If the switch-on or -off time is the same as the timing recording
)
time, only the switch-on or -off time is effective, and the timing
recording time is not applied.
• If the auto timer is turned on,the MP3/CD or USB function
may require an additional step to be activated depending on
the disc(or device). So it is better for you to select the tuner
function instead.

Cancelling the Timer

After having set the timer, it will start automatically as
shown by the TIMER indication on the display. If you
no longer wish to use the timer, you must cancel it.
To...
Cancel the timer ......... Once.
Restart the timer ......... Twice.
• When you select the TIMER OFF mode, the TIMER
RECORDING and TIME function are not available.
button.
( )
)button.
You must also...
) button.
b Select a preset station by
pressing the TUNING/ALBUM
, or . button.
) button.
) button.
) button.
) button.
) button.
Press the TIMER ON/OFF button....
Result: is no longer displayed.
Result: is displayed again.
11 10
English English