Test Tone - Samsung HT-AS710 Instruction Manual

Test tone

Use test tone to check the speaker connection status or level.
To automatically output test tone
REMOTE CONTROL
1
2
To exit setup mode
Press SETUP/MENU button once time.
•
"SETUP OFF" appears on the display and test tone stops.
Using the Test Tone button
Press TEST TONE button.
Test signal will be automatically output as follows; F.L
•
S.B
During test tone output, press ...† button to adjust the speaker output level from
•
-10 to +10 dB by 1 step.
32
√
Press SETUP/MENU button, and then press ENTER
button.
"SETUP MODE" appears on the display and goes into Setup Mode.
•
Press button to select the "TEST-T AUTO",
and then press ENTER button.
Test signal will be automatically output as follows; F.L CEN
S.R S.B S.L S.W .
During test signal output, press ...† button to adjust the speaker output level
•
from -10 to +10 dB by 1 step.
CEN
S.L S.W.
•
F.R
F.R S.R
MAIN UNIT
1
Press SETUP button.
• "SETUP MODE" appears on the display and goes into Setup Mode.
2
Press FUNCTION button to select the "TEST-T AUTO".
3
Press SURROUND button.
• Test signal will be automatically output as follows; F.L
S.R S.B S.L S.W .
• During test signal output, press SELECT ( ) button to adjust the speaker
,
output level from -10 to +10 dB by 1 step.
To stop test tone
Press SETUP button once time.
•
"SETUP OFF" appears on the display and test tone stops.
GB
CEN F.R
33