Table of Contents
Advertisement
OM-DRAGON™
FIXED DESKTOP USE
For fixed desktop installation use the adhesive strips referring to Figure 1.
1.
If you are installing several cradles and you desire to align them, you can
use the alignment plate (see Alignment Plate Installation), otherwise
continue with step 2.
2.
Carefully clean the adhesive strip seat of the base to remove any
impurities that could reduce adhesion.
3.
Remove the protective plastic from one side of the adhesive strips and
stick them onto the base surface.
4.
Remove the plastic from the other side of the strips and affix the base to
the table.
5.
Insert the antenna in the appropriate hole on the body of the cradle and
screw it clockwise until tight.
WALL MOUNTING
Since the OM-DRAGON™ is mounted on its base when delivered, before
performing the following operation, unscrew the fixing screw and detach the
cradle from the base by holding the base tight and pushing the cradle
backwards.
Figure 2- OM-DRAGON™ top view
3
Advertisement
Table of Contents
