Om-Dragon™ Default Configuration - Datalogic OM-DRAGON Series Quick Reference

Radio cradle
Hide thumbs Also See for OM-DRAGON Series:
Table of Contents

Advertisement

DATALOGIC
OM-DRAGON™ DEFAULT CONFIGURATION
RS232 DEFAULT SETTINGS
9600 baud, parity disabled, 8 data bits, 1 stop bit, handshaking disabled,
ack/nack protocol disabled, FIFO enabled, delay disabled, 5 sec. rx timeout
WEDGE DEFAULT SETTINGS
USA keyboard, Caps Lock Auto-Recognition enabled, num lock unchanged,
inter-character and intercode delay disabled, control character emulation =
Ctrl+Shift+key
PEN DEFAULT SETTINGS
Interpret operating mode, conversion to code 39 enabled, output level normal, idle
level normal, minimum output pulse 600µs, overflow medium, interblock delay
disabled
DATA FORMAT
no header, terminator: RS232 = CR-LF; WEDGE = CR, gun and cradle address
stamping and address stamping delimiter disabled
RADIO PARAMETERS
Battery Type: Auto-detect
NETWORK PARAMETERS
RS485 network disabled
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stargate

Table of Contents