Samsung 4 Series User Manual page 23

Temporary image retention may occur when viewing a static image on the set for more than two hours.
N
After selecting "Wide Zoom" mode:
N
Press the ► button to select (
Press the ▲ or ▼ button to move the picture up and down.
After selecting "Zoom" mode:
N
Select ( ) by pressing the ◄ or ► button. Use the ▲ or ▼ button to move the picture up and down. After selecting (
the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
After selecting "Screen Fit" in HDMI (100i) or Component (100i) mode:
N
Press the ◄ or ► button to select
Press the ▲, ▼, ◄ or ► button to move the picture up, down, left and right.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
HD(HighDefinition):
N
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
In PC Mode, only 1: and 4: mode can be adjusted.
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N
Input Source
TV, AV, Component (480i, 480p)
Component (1080i), HDMI (720p, 1080i)
PC
Digital NR

If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the screen.
• Off: Turns the Digital NR function off.
• Low: Sets Digital NR to low.
Medium: Sets Digital NR to medium.
•
• High: Sets Digital NR to high.
• Auto: Sets Digital NR to Auto.
HDMI Black Level

You can directly select the black level on the screen to adjust the screen depth.
• Normal: The screen gets brighter.
Low: The screen gets darker.
•
This function is active only when an external device is connected to the TV via HDMI.
N
HDMI Black Level function may not be compatible with all external devices.
Film Mode

The TV can be set to automatically sense and process film signals from all sources and
adjust the picture for optimum quality.
• Off: Basic video image processing applied and No auto-detection for film-based
programs.
• Auto: Automatically adjusts for the best image quality between film and video programs.
Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).
N
Screen Burn Protection

Configures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the screen.
• Pixel Shift: Shift the picture to prevent and reduce pixel burn.
Optimum condition for pixel shift;
N
Horizontal
Vertical
Time(min.)
), then press the ENTER
E
, then press the ENTER
Item TV/AV/Component/HDMI/PC
0~4
0~4
1~4 Minute
English - 
button.
button.
E
button. You can initialize the setting to 16:9.
E
Picture Size
1:, Wide Zoom, Zoom, 4:
1:, Wide Zoom, Zoom, 4:, Screen Fit
1:, 4:
T V
Picture
Sound
Channel
Setup
T V
Picture
Sound
Channel
Setup
2
2
2 Minute
Picture
Mode : Standard
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint G 50
Advanced Settings
Picture Options
Reset : OK
Input
Move Enter Return
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
Screen Burn Protection
3D Effect
Input
Return
Move Enter
Continued...
), use
8
95
45
50
50
R 50


