Important Notes - RCF AC PRO-FS Owner's Manual

Professional loudspeaker floor stand
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT NOTES

Before connecting and using this product, please read this instruction manual carefully
and keep it on hand for future reference. This manual is to be considered an integral part
of this product and must accompany it when it changes ownership as a reference for
correct installation and use as well as for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of
this product.
SAFETY AND OPERATING PRECAUTION
1. All the precautions, in particular the safety ones, must be read with special attention,
as they provide important information.
2. This floor stand cannot be loaded in a one-sided manner.
3. Use this floor stand on a flat and solid-compact surface only. As soon as the stand is
placed (maximum extended legs) and adjusted, tighten thoroughly the clamping screws
and use the safety pin. After placing the loudspeaker on the stand, check its stability: when
tilted towards every direction at a 10 degree angle (with respect to the surface), the
loudspeaker should not overturn. If necessary, reduce the loudspeaker height and extend
the floor stand base.
4. Two technically and physically suitable persons are required to adjust the loudspeaker
height.
5. Ensure the use of suitable loudspeaker accessories (e.g. the flange adapter shall be the
right size and a quality product).
6. Do not allow unauthorized people be close to the floor stand.
7. The moving of the loaded stand can result in damaging the legs.
8. Do not exceed the maximum central load: 50 kg.
9.
The maximum stand sustainability will be attained if the base leg arms are in the
horizontal position.
10.
Never remove the safety pin, nor loosen the clamping screws in an uncontrolled
manner.
11. Careful handling is required, since adjustments may lead to possible pinching.
12. Do not use solvents, alcohol, benzene or other volatile substances for cleaning the
external parts of this product; simply use a damp cloth.
8
SAFETY AND OPERATING PRECAUTIONS
IMPORTANT
ATTENTION

Advertisement

Table of Contents
loading

Table of Contents