Loudspeaker Positioning On The Floor Stand; Raise / Lower The Loudspeaker - RCF AC PRO-FS Owner's Manual

LOUDSPEAKER POSITIONING ON THE FLOOR STAND
ATTENTION.
- Do not undervalue the weight of the load (max. 50 kg).
- Attaching and moving of the load should be done by
trained installers.
- While moving the load hold the extension in a safe and
firm way.
- Always secure the extension with the locking pin.
(6) Turn the expanding mandrel system-ring lock to the right (OPEN)
to get the smallest diameter.
(7) Place the loudspeaker on the expanding mandrel system.
(8) Now turn the ring lock to the left (CLOSE) until the splints fit
tightly.
ADJUST THE LOUDSPEAKER AIMING
Open the ring lock (6) and aim the loudspeaker to the desired
direction. Re-tighten (CLOSE) the ring lock (8).
USO

RAISE / LOWER THE LOUDSPEAKER

ROLES
The first person holds the extension firmly (9).
The second person loosens the locking knob (10) and
pulls the head of the locking pin until the extension is
able to move (11).
The first person lifts the extension in desired height
(12).
The second person unhands the head of the locking
pin (13) so it´s able to latch into the hole of the exten-
sion.
The first person lowers the extension slowly until the
locking pin is latching into the hole (14).
The second person tightens the locking knob (15).
IMPORTANT: ensure that the second person immedia-
tely tightens the clamping screw (15) in the event the
extension cannot be held securely by the first person.
10