IDEC HG4F Basic Tutorial page 13

7.
Set the items in Select Host I/F
Driver , and click [Next].
Select IDEC for Manufacturer , and
OpenNet (FC3A), MicroSmart (FC4A/
FC5A) for Protocol .
MicroSmart
The Project Settings window will be displayed.
8.
Click [OK].
The Project Settings window enables
common settings for all screens of a
project. However, you may keep the
same settings as shown in this window.
If you wish to change the settings later,
select [Set up] > [Project Settings]
menu.
Creation of a new project is complete.
The Screen Properties window will be
displayed, and you can proceed to cre-
ate a screen.
www.IDEC.com/software
Chapter 3 Screen Creation
3
13