Safety Information, Power Specifications; Environmental Operating Conditions; Compliance Acknowledgments - CUMMINS ALLISON Universal JetScan 4161 User Manual

Safety Information, Power Specifications

High voltage inside. Risk of electric shock.
Turn power OFF and unplug power cord from machine before cleaning.
Do not attempt repairs. Repairs must be made by authorized Cummins Allison
personnel.
Plug three-prong grounded plug (supplied) into properly grounded three-prong
outlet.
Read and understand all instructions before use.
Improper voltage levels can cause equipment malfunction, damage electrical
components, and void warranty.
Provide separate circuit serving only this device and follow listed power
requirements to ensure proper operation.
Provide power conditioning/stabilizing devices if necessary.
• Voltage operating range: 105-240 VAC, automatic switching
• Frequency: 50/60 Hz
• Full load amps (FLA): 1A/.5A
• Electrical supply circuit: The customer must provide a single-phase, dedicated power line
that meets the machine's power requirements. Use a properly grounded circuit breaker in
compliance with applicable local electrical code.

Environmental Operating Conditions

• Temperature: 60°F - 85°F (15°C - 29°C)
• Humidity: 30% to 70% (non-condensing)

Compliance Acknowledgments

• Laser: This equipment may contain Class 2 laser products and complies with FDA Radiation
Performance Standards, 21 CFR Subchapter 1 and the international laser safety standard IEC-
60825.1-2001-08.
• FCC: This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
• Regulatory: CUL, CE
022-7661-00 – Rev. A