Table of Contents
Advertisement
Menu functions
Set the different subwoofer functions using the menu. You
can navigate through the menu as follows:
• Push the select button 20 and/or 27 "OK". The main
menu will appear in the display 16.
• Select the desired submenu with the set buttons 21
and/or 26 "◀/▶" and push the select button 20 and/or
27 "OK".
The submenu will open and you can change the values
with the set buttons 21 and/or 26 "◀/▶".
• With the select button 20 and/or 27 "OK" you apply
the setting.
• Push the button 18 "Back" and/or the function button
24 "0/Return" to return to the previous menu.
• If no entry is made for a few seconds, the device auto-
matically switches back to the previous menu.
"INPUT" menu
With the set buttons you can select the active source
device: FM (Radio FM), AM (Radio AM), AUX 1, AUX 2,
AUX 3, COAX 1, COAX 2, OPT 1, OPT 2.
The input is immediately switched – it is not necessary to
press the select button 20 and/or 27 "OK".
"SURROUND" menu
With the set buttons you can select the surround mode for
2 channel sources in the following order:
PLII Movie
Dolby ProLogic II for movies
PLII Music
Dolby ProLogic II for music
2.1 Stereo
Stereo via front left/right and
subwoofer
5.1 Stereo
Stereo via all channels
Some options may not be available if not all satellite
speakers are connected.
Dolby Digital 5.1 and DTS
When playing back Dolby Digital or DTS encoded
multichannel tracks, surround decoding is locked to these
standards; so this button is disabled.
"LEVEL" menu
You can increase or decrease the relative volume for
each speaker here. Select the desired speaker with the
set buttons 26 "◀/▶":
Front L – Front left
Center – Center
Front R – Front right
Rear L – Rear left
Subwoofer – Subwoofer
Rear R – Rear right
With the set buttons 29 "+/–" you can now set the
relative volume within the range of "–12" to "+12". If no
button is pressed for three seconds, the device will exit
this mode.
14
• Columa 300 R
16
18
20
29
21
24
26
27
Advertisement
Table of Contents
