Advertisement
Quick Links
Maintenance & Operating
VAPOR HOSE COUPLER
USA:
Dixon Bayco USA
Chestertown, Maryland
Phone: 410-778-2000
Fax: 410-778-4702
Toll Free: 800-355-1991
E-mail: dixonbayco@dixonvalve.com
Europe:
Dixon Group Europe Ltd
Preston, England
Phone: +44 (0)1772 323529
Fax: +44 (0)1772 314664
E-mail: enquiries@dixoneurope.co.uk
Mexico:
Dixva, S. de R.L. de C.V.
Monterrey, N.L
Phone: 01-800-00-DIXON (34966)
Fax: 01-81-8354-8197
E-mail: contactenos@dixonvalve.com.mx
Instructions
Dixon Bayco
VR4040CS-AL
For Sales and Service Contact
dixonvalve.com
For
Canada:
Dixon Group Canada Limited
Innisfil (Barrie), Ontario
Phone: 705-436-1125
Fax: 705-436-6251
Toll Free: 877-963-4966
E-mail: isales@dixongroupcanada.com
Asia Pacific:
Dixon (Asia Pacific) Pty Ltd Wingfield,
South Australia
Phone: +61 8 8202 6000
Fax: +61 8 8202 6099
E-mail: enquiries@dixonvalve.com.au
Advertisement
Related Manuals for Dixon VR4040CS-AL
Summary of Contents for Dixon VR4040CS-AL
- Page 1 Toll Free: 877-963-4966 E-mail: dixonbayco@dixonvalve.com E-mail: isales@dixongroupcanada.com Europe: Asia Pacific: Dixon Group Europe Ltd Dixon (Asia Pacific) Pty Ltd Wingfield, Preston, England South Australia Phone: +44 (0)1772 323529 Phone: +61 8 8202 6000 Fax: +44 (0)1772 314664 Fax: +61 8 8202 6099 E-mail: enquiries@dixoneurope.co.uk...
- Page 2 VR4040CS-AL Vapor Hose Coupler Quantity of Components per Unit Item Description Part No. Body 341818 Cage 341819 Poppet 341820 Gasket 112262 Spring 112263 Machine Screw 112264 Bushing 390146 O-Ring #334 110691 Paddle Arm 40215SS Cam Arm Pin 40218SS Button 391860...
- Page 3 VR4040CS-AL Vapor Hose Coupler These instructions and recommendations are provided to ensure proper operation and long service life of Dixon Bayco VR4040CS-AL. Parts are identified by the item number on the assembly drawing and parts list. SEAL REPLACEMENT FOR DIXON BAYCO VR4040CS-AL VAPOR HOSE COUPLER 1.
- Page 4 VR4040CS-AL Vapor Hose Coupler THE POPPET (3) IS HELD UNDER CONSIDERABLE SPRING TENSION. PERSONAL INJURIES MAY RESULT IF THIS PRECAUTION IS NOT TAKEN. HOLD THE POPPET (3) FIRMLY WHEN REMOVING THE O-RING (8) AND RELEASE THE POPPET (3) SLOWLY. 4. Remove the gasket (4). Install the new gasket (4). Make sure that the gasket (4) sits in the groove properly.