Related Manuals for Dixon SJSS Series
Summary of Contents for Dixon SJSS Series
- Page 1 SJSS Series Swivels dixonvalve.com Customer Service 800.789.1718 SJSS Swivels | IOM (Rev C) dixonvalve.com • 800.789.1718...
-
Page 2: Table Of Contents
Safety ........................................3 General Guidelines ..................................... 3 Owner Must Ensure… ..................................3 Care of Stainless Steel .................................... 4 Technical Specifications ..................................5 Installation & Start-Up.................................... 6 Unpacking ......................................6 Welding ......................................6 Function Testing ....................................6 Cleaning ......................................6 General Maintenance ..................................... 7 Service Intervals .................................... -
Page 3: Safety
• If any modification work is performed on the product by the owner, Dixon shall no longer be considered the manufacturer of the device. In such cases, all components must be subjected to a new certification process for any applicable certifications that the equipment holds. -
Page 4: Care Of Stainless Steel
Care of Stainless Steel The stainless-steel components in Dixon Sanitary equipment are machined, welded, and assembled by skilled craftsmen using manufacturing methods that preserve the corrosion-resistant quality of the stainless steel. Retention of corrosion-resistant qualities under processing conditions requires regular attention to the precautions listed below. Examples of corrosion that can result from improper care are included below. -
Page 5: Technical Specifications
Technical Specifications Materials of Construction Technical Data • Product contact components: 316L stainless steel • Non-product contact components: 304 stainless steel Sealing Materials Technical Data • Product contact components: PTFE, EPDM, and silicone (based on configuration purchased) Line Pressure and Product Temperature Technical Data Tube OD PSI at 70°... -
Page 6: Installation & Start-Up
Unpacking Carefully unpack the SJSS series swivel and inspect for any damage that may have occurred during shipment. Report any damage to the carrier immediately. The ports on the swivel are protected with a plastic cover. If any covers are missing or damaged, inspect the ports on the valve thoroughly for any damage. -
Page 7: General Maintenance
General Maintenance To ensure proper operation of your Dixon® equipment, proper maintenance must be performed at regular intervals. To prevent damage, check all fitting connections and screw connections for any loosening of the connections during equipment operation. Maintain adequate spare parts stock for all replacement components on the piece of equipment. Please refer to the repair kits section of the manual for complete component part numbers and kit part numbers. -
Page 8: Assembly And Disassembly
4. After cleaning, rinse all components thoroughly with water. Refer to the assembly section of the manual and follow instructions to properly reassemble the equipment. Assembly and Disassembly To ensure quality operation of your Dixon ® equipment, the equipment must be disassembled and assembled properly to prevent equipment damage during operation. -
Page 9: Disassembly
To ensure proper operation of your Dixon® equipment, proper maintenance must be performed at regular intervals. To prevent damage and improper operation, use only genuine replacement parts and kits offered by Dixon® to maintain the integrity of the equipment. Make sure the parts are properly matched to the series, model, serial number and revision level of the equipment. -
Page 10: Bill Of Materials
Bill of Materials Clamp Style End Connection Shown Part Number ǂ Item No. Material Part Type 316L Upper Body SJSS-32CP5-_ _ _ 316L Inner Body - Clamp SJSS-32CP3-_ _ _ Inner Body - Weld SJSS-32CP1-_ _ _ PTFE Upper Body Seat SJSS-PSEAT-P_ _ _ Inner Body Bushing * SJSS-32CP3B-400... -
Page 11: Part Number Key
The clamp is grinding or The SJSS clamp was swapped Replace the added clamp with the SJSS assembling poorly with another clamp clamp that came with the swivel Any other issue Call Dixon Sanitary 800.789.1718 SJSS Swivels | IOM (Rev C) dixonvalve.com • 800.789.1718... -
Page 12: Certificates
Certificates SJSS Swivels | IOM (Rev C) dixonvalve.com • 800.789.1718... -
Page 13: Limited Warranty
DIXON VALVE AND COUPLING COMPANY, LLC (herein called "Dixon") warrants the products described herein and manufactured by Dixon to be free from defects in material and workmanship for a period of one (1) year from date of shipment by Dixon under normal use and service. - Page 14 Dixon Sanitary N25 W23040 Paul Road Pewaukee, WI 53072 Phone: 800.789.1718 Fax: 800.789.4046 Email: sanitarysales@dixonvalve.com dixonvalve.com © 2020 DVCC •...