Craftsman CMXGMAM2703841 Instruction Manual page 9

Attaching Side Discharge Cover
Your mower is shipped as a mulcher. To convert to side discharge, make sure grass
catcher is off of the unit and rear discharge door is closed.
1. On the side of the mower, lift the mulch cover. See Figure 11.
2. Slide two hooks of side discharge cover under hinge pin on mulching cover
assembly. Lower mulching cover. Do not remove side mulching cover at any
time, even when you are not mulching.
Mulch Cover
Side Discharge
Cover
b
a
b
Figure 10
1
2
Figure 11
ASSEMBLY
Installing/Removing Battery Pack (if equipped)
Read all safety warnings, instructions, and cautionary markings for the
battery pack, charger and product. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
NOTE: To ensure maximum performance and life of lithium-ion battery packs,
charge the battery fully before first use.
IMPORTANT: Refer to instructional manual supplied with battery charger for
charging, maintenance and battery disposal instructions.
1. To install the battery pack perform the following. See Figure 12:
a. Lift the battery box cover.
b. Insert the battery pack into the battery box. An audible "click" will
be heard when the battery is properly connected.
c. Close the battery box cover.
2. To remove the battery perform the following. See Figure 12:
a. Lift the battery box cover.
b. Press the battery pack release button.
c. Pull the battery pack from the battery box.
d. Close the battery box cover.
a
9
WARNING
c
a
b
b
c
Figure 12
d