Craftsman CMXGBAM1054538 Fast Start Manual

A. Remove the wing knobs and carriage bolts
1
from the upper portion of the lower handle.
B. Pivot the upper handle upward.
C. Reattach the wing knobs to secure
the handle.
B
A
Place the chute handle on the lower chute
2
aligned in the channel and snapped into place
Channel
Tab
© 2018 2M1, 2M5 CRAFTSMAN and the CRAFTSMAN logo are trademarks of Stanley Black & Decker, Inc. or an affiliate thereof and are used under license.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING.
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
Starter Rope Handle
C
Wing Knobs
Chute Assembly
Fast Start Guide - Assembly
Upper Handle
Lower Handle
Remove the screws from the chute base.
Position the chute assembly on the chute
base and secure with the screws just removed.
A. Loosely attach the wing knob
and rope guide (opening facing the
rear) to the upper handle.
B. Pull the starter rope handle and route
the starter rope through the rope
guide.Tighten the wing knob.
B
Need Help?
www.CRAFTSMAN.com or Call 1-888-331-4569
3
4
A
778-15077