Table of Contents
Advertisement
ª
Inserting/removing a card
Before inserting/removing a card, set the
[OFF/ON] switch to [OFF].
≥If the card is inserted or removed with the power
turned on, this camera may malfunction or the
data recorded on the card may be lost.
1
Turn off the power 1.
≥Check that the Status indicator has gone off.
2
Slide the card slot cover outwards to open.
3
Insert/remove the card into/from the card slot.
≥When inserting a card, face the label side 1
towards you and push it straight in with one
stroke as far as it goes.
≥When removing the card, press the centre of
the card and then pull it straight out.
4
Securely close the card slot cover.
64
VQT0T48
1
1
2
1
ª
Selecting a mode
Rotate the mode dial to select the desired mode.
1
Rotate the mode dial.
≥Set your desired mode to 1.
: TAPE RECORDING MODE
Use this when you record the image on a tape.
(Also, you can simultaneously record still pictures
on a card while recording images on a tape.)
: TAPE PLAYBACK MODE
Use this to play back a tape.
: CARD RECORDING MODE
Use this to record still pictures on a card.
: CARD PLAYBACK MODE
Use this to play back the still pictures recorded on
a card.
: PC CONNECTION MODE
You can view or edit the images recorded on a
card on your personal computer.
(Refer to the operating instructions for PC
connection.)
1
Advertisement
Table of Contents
