Configuring Ip Settings Through The Console; Logging In To Your Emerge Enterprise - IEI Technology eMerge Enterprise Quick Setup Manual

7. After reviewing the license agreement, click the
IMPORTANT: Click the
8. At the Login page, enter the User name "admin."
9. Enter the Password "admin."
10. Click Go. The security application will now display

Configuring IP settings through the console

1. Connect a monitor and a keyboard to the Enterprise Ultra back panel connectors, or the
Enterprise front panel connectors. See the images above on page 2.
NOTE: The USB ports on the front panel may also be used.
2. Enter the user name admin.
3. A Password
4. An IP settings screen appears. Use the UP/DOWN arrow keys to select a setting and press
Enter to edit the setting.
5. The Current value
6. Beneath the Current value next to the
and press Enter.
7. Use the arrow keys to move the highlight down to
setting changes that you have made are now saved to the eMerge Enterprise.
8. Repeat steps 5 through 8 to make any further changes to the Enterprise IP settings.
9. Use the arrow keys to highlight

Logging in to your eMerge Enterprise

NOTE: The default IP address of a Enterprise is 192.168.0.250. If you changed this in
previous steps then enter the new address here.
1. Open your browser and enter the Enterprise IP address into the address line. Press the
Enter key
2. At the Login page enter the
3. Enter the Password
4. Click Go. The security application will now display.
Apply button only once
prompt appears. Enter admin.
for the setting displays at the bottom of the screen.
Exit and press Enter.
User name
"admin."
Apply button to accept it.
New value prompt, enter the new value for this setting
Save changes
"admin."
and press Enter. The IP
4