Connecting Power And The Network To The Emerge Enterprise; Power On The Emerge Enterprise - IEI Technology eMerge Enterprise Quick Setup Manual

Connecting Power and the Network to the eMerge Enterprise

Connecting Power and the Network
1. On the back of the eMerge Enterprise connect a grounded power cord to the power
connector and connect the network cable to the network connector. See the images below.
NOTE: You need not connect a keyboard or monitor to the eMerge Enterprise. Once it is on
the network you can configure it from any network connector computer with a browser.
The back panel of the eMerge Enterprise Ultra, 2U rack mount.

Power on the eMerge Enterprise

1. For the Enterprise Ultra (2U), open the drive door on the front panel and press the power
switch. See diagram below.
The back panel of the eMerge Enterprise, 1U rack mount.
Inside the drive door on the Enterprise Ultra
2