Advertisement
Quick Links
IEI eMerge™ Enterprise and Enterprise Ultra
Quick Setup Guide
Contents
Connecting Power and the Network to the eMerge Enterprise ...................... 2
Configuring IP Settings...................................................................................... 3
Logging in to your eMerge Enterprise.............................................................. 4
May 12, 2009
1
Advertisement
Related Manuals for IEI Technology eMerge Enterprise
Summary of Contents for IEI Technology eMerge Enterprise
- Page 1 IEI eMerge™ Enterprise and Enterprise Ultra Quick Setup Guide Contents Connecting Power and the Network to the eMerge Enterprise ...... 2 Configuring IP Settings..................3 Logging in to your eMerge Enterprise.............. 4 May 12, 2009...
- Page 2 See the images below. NOTE: You need not connect a keyboard or monitor to the eMerge Enterprise. Once it is on the network you can configure it from any network connector computer with a browser.
- Page 3 2. You can edit any of the settings on this page. NOTE: If you change the IP address of the eMerge Enterprise be sure to take note of the new address as you will need it to log in later.
- Page 4 Save changes and press Enter. The IP setting changes that you have made are now saved to the eMerge Enterprise. 8. Repeat steps 5 through 8 to make any further changes to the Enterprise IP settings. 9. Use the arrow keys to highlight Exit and press Enter.