Panasonic WJ-ND300 Maintenance Manual page 7

WJ-ND300 SATA conversion guide (single)
(13) Remove four screws (1x wafer-head screw, 3x screw
with washer) fixing the Heat Sink (for Main board), and
remove the Heat Sink (for Main board).
Note: Discard the removed Heat Sink.
(14) Remove the cool sheet from the Main board
(Center of IC103).
Note: Discard the removed cool sheet.
(15) Remove the three spacers from the Main board.
Note: Discard the removed spacers.
(16) Secure the heat sink (for Main board) to the SATA board
mounting bracket with additional two screws.
Panasonic
Heat Sink
(for Main board)
spacer
additional two screws
(wafer-head screw)
SATA board
mounting bracket
7
ND300_SATAConversionGuideS_A
Maintenance guide
screw with washer
cool
sheet
Main board
wafer-head
screw
IC103
Heat Sink
(for Main board)