Panasonic WJ-ND300 Maintenance Manual page 15

WJ-ND300 SATA conversion guide (single)
(41) Attach the Caution label to the specified location on the
HDD unit.
(42) Install the top cover on the main unit with 11 screws.
(43) Connect the connector to the front panel and fix the front panel with one screw in the reverse order of the removal.
Front panel Front panel
connector connector
(44) Attach the SATA label, large (for top) to the top panel.
Attach the SATA label, small (for front) to the front panel.
Note:
The new HDDs need to be formatted before operation. Refer to the Operating Instructions for detail.
+++++++++++++++++++++++++++++++++++++
Panasonic
SATA label(for top)
End of the document
15
Screw
Connectorscover
7-10mm
SATA label(for front)
+++++++++++++++++++++++++++++++++
ND300_SATAConversionGuideS_A
Maintenance guide
Caution label
A