Panasonic WJ-ND300 Maintenance Manual page 10

WJ-ND300 SATA conversion guide (single)
(24) Connect the power cables (red, yellow) to the CN4 of DC/
DC board, and pass them through the clamps 1, 2, 4 as
shown right.
(25) Connect the power cables (red, blue) to the CN3 of DC/DC board, and pass them through the clamps 1, 2, 3 as shown below.
(26) Connect the power cables (white, orange) to the CN6 of
DC/DC board, and pass them through the clamps 5, 6, 8 as
shown right.
(27) Connect the power cables (white, purple) to the CN5 of DC/DC board, and pass them through the clamps 5, 6, 7 as shown below.
DC/DC Board
Panasonic
DC/DC Board
Clamp 1, 2
CN4
(red, yellow)
Clamp 3
(red, blue)
CN3
Clamp 1, 2
(red, yellow,
red, blue)
CN4
CN6
Clamp 5
(white, orenge)
CN3 CN4
CN6
CN5
Clamp 5
(white, orenge,
white, purple)
CN3 CN4
10
ND300_SATAConversionGuideS_A
Maintenance guide
Clamp 4
(yellow, gray)
Clamp 8
(orenge, gray)
Clamp 6
(white, orenge)
Clamp 7
(red,
purple)
Clamp 6
(white, orenge,
white, purple)