HP MCS G2 Installation Overview page 9

9. (Optional) Enter an SSL key.
10. Click Save Settings.
11. To set up your trap receivers, click Setup>Management>Trap
Receivers.
12. Click Save Settings.
13. (Optional, but recommended) To set up your SNMP managers,
click Setup>Management>SNMP Managers.
14. Click Save Settings.
For more information on adjusting the management module settings
through the web interface, see the HP Modular Cooling System G2
Web Interface User Guide located on the Documentation CD
included with this product.
Automatic Door Release Kit
To view the HP Automatic Door Release hardware installation
instructions, see the documentation that shipped with that kit.
To enable the automatic door release functionality:
1. Click Setup>Advanced.
2. Select the Enable button at the bottom of the screen.