How To Use; Batch Processing - CUMMINS ALLISON JetSort 1606 Operating Instructions Manual

How to Use

Batch Processing

Start Batch with JetSort and JetScan
1. Pour coins from lift tray into coin hopper.
2. On the JetSort, press START BATCH.
3. On the JetScan, select a currency Operating Mode (Count, Sort or Mixed).
4. Place currency in the JetScan hopper.
5. JetScan will automatically begin processing currency and will stop to display prompts, depending on
which Operating Mode is chosen.
6. The JetSort displays <ENTER> and the amount of currency processed.
TOT
COMPLETE
7. Press ENTER to accept the currency total and display the total amount of coins and currency
processed.
R&C
Batch Waiting
8. Press CONT to continue processing coins/currency or press END to finish.
R&C
Batch Ended
Retrieve JetScan Information (Single Pocket)
JetSort displays running totals for all coins and currency while in the Batch Waiting condition. Press
individual denomination keys from the JetSort Batch Waiting screen to view values for each
denomination.
To display totals on the JetScan Single-Pocket, use the following steps:
1. Press DENOM on JetScan to display totals for individual denominations.
2. Press UNIT on JetScan to alternate between total bill counts, total dollar values, denomination counts
and values, and strap limit counts and values.
Retrieve JetScan Information (Two Pocket)
To display totals on the JetScan Two-Pocket, use the following steps:
1. Press MENU on JetScan touch screen.
2. Press BATCH to display totals.
$
$
How to Use | JetSort
10.00
<ENTER>
23.48
23.48
1606 interface with JetScan or JetCount | 7
®