Starting Navigation - Navigon 72 Series User Manual

4. Tap on
The D
of the selected destination is displayed in the upper left-hand
corner.
5. Tap Take Me There.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.11

Starting navigation

The map is open in Preview mode.
The navigation destination is depicted by a small flag. The distance to
cover and the estimated time of arrival (ETA) are displayed.
Tap on the ETA if you want the estimated duration of travel to be
►
displayed instead.
Route Profile
The route is calculated on the basis of a route profile.
If you want to view or change the route profile, tap Route Profile.
►
Note: If you change the route profile, the changes will also apply to
future navigations.
Information about individual route profile settings can be obtained by
tapping the related
Turn-by-Turn List
If you want to see detailed directions for the route, tap on Options >
►
Turn-by-Turn List.
For details of the functions in the T
chapter "Turn-by-Turn List" on page 48.
Start Navigation
Tap on Start Navigation or simply start driving.
►
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
Navigation
(OK)
M
ESTINATION ON AP
(Help) button.
User's manual NAVIGON 72XX
window opens. The detailed address data
- -T
URN BY URN
L window refer to
IST
- 31 -