Antenna Lightning Arrestors; Approved Antenna Types/Gains; Table 9 - Lightning Arrestor Specifications For Remote Antenna(S); Table 10 - Approved Antenna Types/Gains - Honeywell OneWireless XYR 6000 Professional Installation Manual

10 Antenna Lightning Arrestors

Honeywell Part
Number Manufacturer
50018279-090 ALTELECON
The lightning surge arrestor must be properly grounded in order to perform per specification. Connecting to local ground using
2
a No. 12 (4 mm ) copper conductor is recommended. See the installation manual for other details.

11 Approved Antenna Types/Gains

Antenna Antenna
Type Application
Omni Point to
(integral) Multi-Point
Omni Point to
(integral) Multi-Point
Omni Point to
(remote) Multi-Point
Directional Point to
(remote) Multi-Point
Note:
1. The Centurion antenna listed in Table 10 has a specified gain of 2.2 dBi. Through EIRP measurements performed during
antenna qualification testing, this antenna when installed in the Honeywell Radome and attached to the XYR 6000 Transmitter
body in either the right-angle or straight integral antenna options has an actual gain of -2 dBi. This value is used in
determining the maximum EIRP for Agency Compliance.
OneWireless XYR 6000 Transmitter
Professional Installation Guide
Table 9 – Lightning Arrestor Specifications for Remote Antenna(s)
Manufacturer
Part Number
AL-NFNFB-9
Table 10 – Approved Antenna Types/Gains
Manufacturer
Manufacturer
Part Number
CENTURIO
MAF94152
N
WHON511 –
HYPERLINK
HYPERLINK HGV-2409U
HYPERLINK HG2414D
Honeywell Proprietary
50021956
Specification Connector Type
50 ohm N Female to N
Honeywell
Part Number
50016185-001
50029933-001
0001
50018414-001
50018415-001
Frequenc
y
(GHz)
0 – 3
Female
Peak
Beam Freq.
Gain
Width (GHz)
(dBi)
1
Omni -2 2.4
Omni 4 2.4
Omni 8 2.4
25° 14 2.4
Rev B
Attenuatio
n
(dB)
0.4 (max)
Agency
Compliance
FCC, IC,
ETSI,
ACMA
FCC, IC,
ETSI,
ACMA
FCC, IC,
ETSI,
ACMA
FCC, IC,
ETSI,
ACMA
27 August 2008
Page 17 of 28