Table of Contents
Advertisement
Blu-ray Disc
BONUSVIEW
TM
Playing Secondary Video (Picture-in-Picture)
and Secondary Audio is for Blu-ray Disc
only. Secondary video can be played from a
disc compatible with the Picture-in-Picture
(PIP) function. For the playback method, refer
to the instructions for the disc.
1. Turn on secondary video by pressing the
PIP button.
2. Press the PIP AUDIO button to select the
secondary audio, and select an option except
Off. The secondary audio is opened, you can
hear the disc secondary video sound.
In order to hear the secondary audio, the PIP
feature on the disc must be turned on.
3. Press the PIP button again to turn off the
secondary video.
Primary video
Secondary video
with Secondary Audio
This function is not available when the
primary video is played in Search, Slow-
Motion, or Frame-by-Frame or Fast Forward/
Reverse mode.
To listen to the secondary audio, the digital
audio output must be set to "Bitstream",
"Re-encode" or "PCM". Otherwise, only the
primary audio can be heard.
Notes:
-‐ N ot a ll t he B lu-‐ r ay™ d iscs c an s upport t his
function.
-‐ H igh D efinition P IP ( Second V ideo) i s n ot
supported.
Watermark
This product uses Cinavia technology to limit
the use of unauthorized copies of some
an unauthorized copy is detected, a message
will be displayed and playback will be
interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.
com. To request additional information about
Cinavia by mail, send a postcard with your
mailing address to: Cinavia Consumer
Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA
14
BDX2300KE full manual_3-6.indd
TM
TM
14
6 Customizing
This section describes the various setting
option of this Blu-ray Disc
If the setup option is greyed out, it means
the setting cannot be changed at the
current state.
General Setting
1. Press SETUP button on the remote
control. The Setup Menu appears.
General Setting
Screen Saver
System
Language
Disc Auto Playback
CEC
Playback
Load Default
Security
Upgrade
Network
Move cursor key to select menu option
then use "OK" key to select
2. P ress to select an option, then press
to access.
3. P ress / t o select a setup option and
press .
4. Select the setting you wish to change
- Press to return to the previous menu.
[System]
To change the following system option to
personalize your Blu-ray Disc
[Screen Saver]
Turn On or Off the screen saver mode.
It helps to protect the TV screen.
{ On } – Set the screen saver active
after approximately 5 minutes with no
operation. You can turn off the screen
saver by pressing the SETUP button.
- The Blu-ray Disc
TM
standby mode if there is no operation
after the screen saver is engaged for
approximately 10 minutes.
{ Off } – Turn off the screen saver
mode. The Blu-ray Disc
switch to standby mode automatically.
[Disc Auto Playback]
Turn On or Off the disc automatic
playback switching mode.
{On} – The disc playback automatically
after loading.
{Off} – Turn off disc auto playback
mode.
[CEC]
uses the HDMI CEC (Consumer
Electronics Control) protocol. You can
use one single remote control to control
player.
TM
On
On
On
More...
More...
Exit
SETUP
player.
TM
player will switch to
player will not
TM
2012-10-25
9:38:39
Advertisement
Chapters
Table of Contents
