4 Preparation
Always f ollow t he i nstructions i n t his c hapter
in sequence.
Note:
-‐ Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
Prepare the remote control
1. Open the battery compartment.
2. Insert one R03 battery with correct
polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
-‐ If you are not going to use the remote control
for a long time, remove the battery.
-‐ Risk of explosion! Keep battery away from
heat, sunshine or fire. Never discard battery in
fire.
the unit are as follows.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
10
BDX2300KE full manual_3-6.indd
7 m
10 m
7 m
10
Setting up the player
Find the correct viewing input
1. Press
to turn on this product.
1
2. Turn on the TV and switch to the correct
video-in input (refer to the TV user manual
on how to select the correct input).
Initial Setting
you need to follow these steps.
1. A welcome page will be displayed when
this product is powered on.
3. Select your desired language,
resolution a nd a spect r atio u sing / , t hen
4. Press SETUP to exit the Setup menu.
Use the SETUP menu
1. Press SETUP to display the Setup menu
when the Blu-ray Disc
Player is playing or
TM
no disc. And press SETUP to exit the Setup
menu.
Tip:
-‐ When playing high-‐ d efinition sources, you must press
STOP
S ETUP
b utton t o e nter
interface.
Select menu display language
1. Press SETUP, [General Setting] menu
is displayed.
2. Select [Language], then press .
3. Select [OSD], then press .
- The language options may vary for
different regions.
4. Press /
to select a language, then
press
Note:
-‐ If this disc player is connected to a HDMI CEC
compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting.
2012-10-25
9:38:38