Panasonic DMR-UBT1 Operating Instructions Manual page 51

Digital Audio Output
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
HE-AAC
Select the audio signal to output.
• Select "PCM" when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
System Volume Adjustment
If the volume of a programme being watched
through this unit is different than the volume
of a programme being watched directly on the
TV, the gap may be reduced by switching this
setting to Mode 1 or Mode 2. (This function
works only while you are watching a
programme or playing back a programme
recorded in DR mode.)
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
• To enjoy BD-Video that supports Dolby Atmos
Connect this unit to an AV amplifier or similar equipment
that supports it with an HDMI cable, and select the
following settings:
– Dolby D / Dolby D + / Dolby TrueHD: "Bitstream"
– DTS / DTS-HD: "Bitstream"
– BD-Video Secondary Audio: "Off"
Dolby Atmos is a trademark of Dolby Laboratories.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the Channel Information
screen disappears automatically.
Front Panel Display
Changes the brightness of the front panel
display.
• If "Automatic" is selected, the display turns dark
during play and disappears when the unit is in
standby. While using this mode, the standby
power consumption can be reduced.
• When "Quick Start" is set to "Off" or "Timer
Setting for Quick Start" (
fixed to "Automatic".
Screen Saver
This is to prevent image retention on the screen.
Teletext
Select the Teletext (
Connection
or DTS:X
® ®
3D Settings
3D AVCHD Output
If 2D AVCHD video is recognised as 3D video
and cannot be played back correctly, you may
be able to play it by changing the setting.
3D Playback Message
Set to display or hide the 3D viewing warning
screen.
VIERA Link
Select "Off" when you do not want to use VIERA
Link.
54), this function is
12) display mode.
TQBS0291
51