Terminating The Speaker Add Function Temporarily - Sony SRS-XB10 Help Manual

Help Guide
Wireless Speaker
SRS-XB10

Terminating the Speaker Add function temporarily

To terminate the Speaker Add function temporarily, follow the procedure below.
Press and hold the ADD and – (volume) buttons for about 3 seconds until a beep is heard.
1
Hint
The Speaker Add function will not be terminated even if the speaker is turned off. When the speaker is turned on, the speaker will try to establish
the Speaker Add function with the other speaker that had been connected. If you want to use the Speaker Add function again, turn on the other
speaker. To terminate the Speaker Add function temporarily while in use, press and hold the ADD and – (volume) buttons for about 3 seconds until
a beep is heard.
To terminate the Speaker Add function temporarily while using two speakers, press and hold the ADD and – (volume) buttons for about 3 seconds
until a beep is heard.
The Speaker Add function can be used even when connecting a portable audio device, etc. to the speaker's AUDIO IN jack and playing it.
Related Topic
Listening to music wirelessly with two speakers (Speaker Add function)
Switching between double mode and stereo mode (Speaker Add function)
4-694-214-11(3) Copyright 2017 Sony Corporation
59