Terminating The Speaker Add Function - Sony SRS-XB30 Help Manual

Help Guide
Wireless Speaker
SRS-XB30

Terminating the Speaker Add function

To terminate the Speaker Add function, follow the procedure below.
Press and hold the ADD button for about 3 seconds until a beep is heard.
1
Hint
If a portable audio device, etc. is connected to the AUDIO IN jack, the speaker automatically switches to AUDIO IN mode, and the Speaker Add
function is terminated.
The Speaker Add function will not be terminated even if the speaker is turned off. When the speaker is turned on, the speaker will try to establish
the Speaker Add function with the other speaker that had been connected. If you want to use the Speaker Add function again, turn on the other
speaker within 1 minute.
If you want to use the speaker that had been used as one of the speakers of the Speaker Add function by itself, press the
PAIRING button to turn on the speaker, then press and hold the ADD button for about 3 seconds until a beep is heard to terminate the Speaker
Add function.
To terminate the Speaker Add function while in use, press and hold the ADD button for about 3 seconds until a beep is heard.
Related Topic
Listening to music wirelessly with two speakers (Speaker Add function)
Switching between double mode and stereo mode (Speaker Add function)
4-694-130-11(2) Copyright 2017 Sony Corporation
(power)
70