Sony SRS-XB10 Help Manual page 60

Make a BLUETOOTH connection with a BLUETOOTH device.
3
When the (BLUETOOTH) indicator of the speaker stops flashing and lights up, the BLUETOOTH connection is
established.
Start playback on the BLUETOOTH device, and adjust the volume to moderate level.
4
Press the –/+ (volume) buttons on one of the speakers to adjust the volume.
5
Volume adjustment of one speaker is reflected on the other.
Hint
When making or receiving a call, only operate the speaker where the
If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is
connecting with the speaker, there may be distorted sound or noise in the speaker output. In this case, terminate the BLUETOOTH connection
between the BLUETOOTH device and other BLUETOOTH device(s).
The Speaker Add function can be used even when connecting a portable audio device, etc. to the speaker's AUDIO IN jack and playing it. If the
device that is connected to the AUDIO IN jack is monaural, sound will only be output from the speaker whose L indicator lights up.
Note
If you reset or initialize one of the two speakers while using the Speaker Add function, make sure to turn off the other speaker. If you do not turn
off the other speaker before restarting the Speaker Add function, there may be problems in making a BLUETOOTH connection and outputting
sound.
(BLUETOOTH) indicator lights up.
55