Sony SRS-XB10 Help Manual page 23

Follow the on-screen instructions to establish the connection.
When the BLUETOOTH connection is established,
To disconnect, touch the speaker with the device again.
Hint
Even if the speaker is not turned on, the
(BLUETOOTH) indicator lights up in white.
If you cannot connect the speaker, try the following.
Move the device over the N-mark part of the speaker slowly.
If the device is in a case, remove the case.
If you touch a device on the speaker, the device terminates the BLUETOOTH connection with the current device (NFC-compatible headset, etc.),
and connects with the speaker (One-touch connection switching).
Note
If your device is a type that goes into standby mode in response to magnetic force, it may not be able to be connected by NFC.
Related Topic
How to make a wireless connection with BLUETOOTH devices
Disconnecting the NFC-compatible device by One-touch (NFC)
Switching devices by One-touch (NFC)
Listening to music of a device via BLUETOOTH connection
4-694-214-11(3) Copyright 2017 Sony Corporation
(BLUETOOTH) indicator stays lit.
(BLUETOOTH) indicator flashes when touching with a device. When the connection is established, the
18