Technical Specifications - Electrolux WASL 3 T User Manual

44 electrolux
used when a prewash has been selected.
For cycles without prewash, they must be
added via means of a dosing ball. Deter-

TECHNICAL SPECIFICATIONS

DIMENSIONS
LINE VOLTAGE /FREQUENCY
POWER CONSUMPTION
WATER PRESSURE
Connection to water supply
INSTALLATION
Remove all protective packaging for transit
before using for the first time. Keep in case
needed for future transit: Transporting a non-
secured appliance may damage internal
components and cause leakages and mal-
functions. The appliance can also be dam-
aged through physical contact.
Unpacking
1
3
Untying
a 1b
Height
Width
Depth
Minimum
Maximum
2
4
1a 1b
3
2
gent tablets or doses must be placed in the
detergent compartment of your appliance's
dispenser box.
850 mm
400 mm
600 mm
230 V / 50 Hz
2300 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
Type 20/27
2a
3
To install your washing machine at the
same level as surrounding furniture, pro-
ceed as shown on picture 4.
Water supply
Install the supplied water inlet hose at the
rear of your washing machine by proceed-
ing as follows. Do not reuse an old hose.
The water inlet hose can not be extended. If
it is too short, please contact the after-sales
service.
1
2b
4
2