Safety Information - Electrolux WASL 3 T User Manual

Hide thumbs Also See for WASL 3 T:
Table of Contents

Advertisement

Available languages

Available languages

Dispenser box

SAFETY INFORMATION

Please read these points carefully before in-
stalling and using your appliance. Keep this
user manual with your appliance.
General safety
• Do not modify or attempt to modify this
appliance. This would put yourself in dan-
ger.
• Ensure that all coins, safety pins, brooch-
es, screws etc have been removed be-
fore starting a washing programme. If left
in washing, they can seriously damage
the appliance.
• Use the recommended quantity of deter-
gent.
• Put small items together (socks, belts
etc.) in a small linen bag or pillow case.
• Unplug and close inlet hose tap after us-
ing appliance.
• Always disconnect the power supply
from the appliance before cleaning or
maintenance.
• Do not machine wash clothes with rib-
bing, unfinished or torn material.
Installation
• Unpack or ask for the appliance to be un-
packed immediately upon delivery.
Check the outside of the appliance is not
damaged in any way. Report all transit
damage to your retailer.
• Remove all transit bolts and packaging be-
fore installing the appliance.
• Connection to the water supply must be
carried out by a qualified plumber.
• If your domestic electrical circuit needs
adapting to allow the appliance to be plug-
ged in, use a qualified electrician.
• Ensure that, after installation, the power
cable is not trapped under the appliance.
Prewash
Wash
Softener (do not fill above the MAX symbol
• If the appliance is installed on carpeted
floor, ensure that the carpet does not ob-
struct any ventilation ducts located at the
base of the appliance.
• The appliance must be equipped with an
earthed power plug which conforms to
regulations.
• Before connecting your appliance to the
power supply, carefully read the instruc-
tions in the chapter entitled "Electrical con-
nection".
• Replacing the power cable should only
be carried out by an authorised service en-
gineer.
• The manufacturer cannot be held respon-
sible for any damage resulting from incor-
rect installation.
Precautions to be taken against frost
If your appliance is exposed to tempera-
tures below 0°C, the following precautions
must be taken:
• Close the tap and disconnect the inlet
hose.
• Place the end of this hose and the drain
hose in a basin on the floor.
• Select the Drain programme let it run until
the end of the cycle.
• Disconnect the appliance from the power
supply by turning the programme selec-
tor to "Stop"
• Unplug the appliance.
• Replace the inlet hose and drain hose.
This way, the water remaining in the hoses
will be drained away, avoiding any ice forma-
tion which would damage your appliance.
Before turning your appliance on again, en-
sure that it is installed in an area where the
temperature will not fall below freezing.
electrolux 37
M
.
)

Advertisement

Table of Contents
loading

Table of Contents