Table of Contents
Advertisement
12 Maintenance
The printer is a quite complex motion system and requires maintenance.
How to maintain/exchange hot-ends
For cleaning or maintenance purposes, the hot-end can be easily removed from the FELIX Pro L/XL.
Please take the following steps.
1.
Check if there is still filament loaded in the hot-end. If there is no filament loaded, then go to step 4. If yes, from the
display unit or PC interface select the correct extruder and heat it up.
2.
Retract the filament from the hot-end.
3.
Let it cool down.
4.
Turn off the printer.
5.
Open the cover in front. (picture is of a Pro 2 but the machine uses the same head)
6.
Remove hot-end connector of the corresponding hot-end.
Quick Start Guide FELIX Pro L/XL
19
Page
Advertisement
Table of Contents
