Clean The Print Surface - Felix printers FELIX Pro L Quick Start Manual

Clean the print surface

The first layer is the most important layer of a print.
layer adhesion do one of the following:
First remove any filament residue from the surface, with a spatula or carefully with the
tweezers.
Second use one of the two approaches to further prepare the surface:
A. Use the already applied Kapton layer on the flex plate and clean it with detergent like
methylated spirit or 100% alcohol . It must be absolutely grease free. Grease from fingers
can ruin adhesion to the bed.
B. Use an adhesive like Magigoo, Pritt Powerstick, 3DLac or similar (recommended for larger
prints).
Note: When using a spray adhesives ensure the flex plate is removed from the printer. The
spray can damage the linear motion components of the machine.
Quick Start Guide FELIX Pro L/XL
It forms the basis for the rest of the print. To ensure the most optimal first
11
Page