Stopwatch - Nokia 7360 User Manual

O r g a n i s e r
Select Menu > Organiser
screen, enter the first number in the calculation. Press # for a decimal
point. Select Options
root, or Change sign. Enter the second number, if needed. For a total,
select Equals. Repeat this sequence as many times as it is necessary. To
start a new calculation, select and hold Clear.
To perform a currency conversion, select
Calculator. To save the exchange rate, select
Select either of the displayed options. Enter the exchange rate, press the
# key for a decimal point, and select OK. The exchange rate remains in
the memory until you replace it with another one. To perform the
currency conversion, enter the amount to be converted, and select
Options > In domestic
Note: When you change base currency, you must enter the new rates
because all previously set exchange rates are set to zero.

■ Stopwatch

To measure time, take intermediate times, or take lap times, use the
stopwatch. During timing, the other functions of the phone can be used.
To set the stopwatch timing in the background, press the end key.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Select Menu > Organiser
Split timing — to take intermediate times. To start the time observation,
select Start. Select
intermediate time. To stop the time observation, select Stop. To save the
measured time, select Save. To start the time observation again, select
Options > Start. The new time is added to the previous time. To reset the
time without saving it, select Reset. To set the stopwatch timing in the
background, press the end key.
Lap timing — to take lap times. To set the stopwatch timing in the
background, press the end key.
Continue — to view the timing that you have set in the background
66
> Calculator. When 0 is displayed on the
>Add, Subtract, Multiply, Divide, Square,
or In foreign.
> Stopwatch
Split every time that you want to take an
Menu > Organiser
Options > Exchange
and from the following options:
Square
>
rate.