Removing The Shelf Holders; Electrical Connection; Ventilation Requirements - AEG SANTO K 91800-5i User Manual

26
Installation
Climate class
N
ST
T

Removing the shelf holders

Your appliance is equipped with shelf retainers
that make it possible to secure the shelves during
transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction of the
arrow (A).
2. Raise the shelf from the rear and push it for-
ward until it is freed (B).
3. Remove the retainers (C).

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for
this purpose. If the domestic power supply socket is not earthed, connect the appliance to
a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Directives.

Ventilation requirements

The airflow behind the appliance must be suffi-
cient.
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Ambient temperature
A
50 mm
B
C
min.
200 cm
2
min.
200 cm
2