LG 42PM4M Owner's Manual page 38

21. Tile H Size (Command : d g)
G To set the Horizontal size.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
22. Tile V Size (Command : d h)
G To set the Vertical size.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
23. Tile ID Set (Command : d i)
G To assign the Tile ID for Tiling function.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 64
24. Elapsed time return (Command : d l)
G To read the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
* The data is always FF(in Hex).
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
* The data means used hours. (Hexadecimal code)
26. Low Power (Command2:q)
G To control the low power function on/off.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 0: Low power off
1: Low power on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0: Low power off
1: Low power on
External Control Device Setup
Owner's Manual 39