Remote Control Key Functions - LG 42PM4M Owner's Manual

Introduction

Remote Control Key Functions

Remote Control Key Functions
- When using the remote control, aim it at the remote control sensor on the monitor.
- Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press
the key again as necessary.
POWER
AV
INPUT
SLEEP PSM ARC
1 2 3
4 5 6
7 8 9
0
*
MENU
SET
VOL
MUTE
Installing Batteries
• Open the battery compartment cover on the
back side and install the batteries matching
correct polarity (+ with +, - with -).
• Install two 1.5V AA batteries. Don't mix old
or used batteries with new ones.
Replace cover.
10 Plasma Monitor
AUTO
*
EXIT
VOL
*
AV
Selects: AV, Component 1-2, RGB, HDMI/DVI input sources.
POWER
Turns your monitor or any other programmed equipment on or
off, depending on mode.
INPUT
Selects: AV, Component 1-2, RGB, HDMI/DVI input sources.
SLEEP
Sets the Sleep Timer.
PSM
Adjusts the factory preset picture according to the room.
ARC
Changes the picture format.
AUTO
Automatic adjustment function
NUMBER buttons
Dosen't work for monitor mode.
*
N ot functional
MENU
Brings up the main menu to the screen.
EXIT
Clears all on-screen displays and returns to monitor viewing
from any menu.
THUMBSTICK (Up/Down/Left/Right/SET)
Navigate the on-screen menus and adjust the system set-
tings to your preference.
VOLUME UP/DOWN
Increases/decreases the sound level.
MUTE
Switches the sound on or off.
*
N ot functional