Factory Mode - Philips BTM288 User Requirement Specification

20. FACTORY MODE

Version check
In standby mode press and hold ALBUM+ combine with EJECT key until display show
Develop date and version number .e.g."04/29 14" .04/29 means the day 14 means the
version number. To quit this mode ,press POWER key .
Factory reset
Same as version checking operation method ,when the display show the date and version
information ,press stop key ,display will show "NEW" after that ,BTM288 will return to
factory default setting .
Full display
In standby mode ,press and hold ALBUM- combine with DISPLAY key until full display
turn on .
Page 56 of 56 Ver 1.0 Update : 2 Jun 2007