Table of Contents
Advertisement
3
Press to close the disc tray.
4
Press CD on the remote control to select
the disc source.
» [Reading] (reading) blinks for a
moment, then CD starts playing
automatically. If not, press
Play from a USB storage
device
Note
•
Make sure that the USB device contains playable audio
content.
1
Insert the USB storage device into the
socket.
2
Press USB on the remote control to select
the USB source.
» Play starts automatically. If not, press
.
Control play (CD/USB mode)
/
.
Select an audio file;
Press and hold to fast
forward or fast reverse
the track during playback,
then release to resume
play.
/
OK
REPEAT/SHUFFLE
Program tracks
You can program a maximum of 20 tracks.
1
In CD or USB mode, press
playback.
2
Press PROG to activate the programming
mode.
» [PROG] (program) is displayed.
3
For MP3/WMA tracks, press
repeatedly to select an album.
4
Press
/
repeatedly to select a track,
then press PROG to confirm.
5
Repeat steps 3-4 to program more tracks.
6
To play the programmed tracks, press
» During play, [PROG] (program) is
displayed.
• To erase the program, press
For MP3/WMA tracks,
select an album or folder.
Start or pause play.
Stop play.
Confirm a selection.
[
]: Play the current
track repeatedly.
[
]: (for MP3/WMA
only): Play all tracks in this
album repeatedly.
[
]: Play all tracks
repeatedly.
]: Play all tracks
[
randomly.
To return to normal play,
press REPEAT/SHUFFLE
repeatedly until the
repeat or shuffle icon
disappears.
to stop
/
twice.
EN
.
10
Advertisement
Table of Contents
