Download Print this page

Press Enter - Lee Technology LTK-1100 Operating Instructions Manual

Guest paging system

Table of Contents

Unplug All

Coasters

Message sent

Plug in pagers

Press * to scroll

Menu options

TURNING THE OUT OF RANGE OFF

• Remove all the coasters from the charging unit or unplug the power supply that is

connected to the charging base

• At the "Out of Range" menu, press "#/Select" key to turn the out of range OFF.

• Press "ENTER" key 3 times. After sending the signal, all the coasters will light up once to

tell you that they received the new code.

• Press "CANCEL" key to exit the system programming menu.

To test the coasters with out of range off, unplug the power supply, that is connected to the

transmitter. After 30 - 45 seconds, all the coasters should not play the melody since the out

of range were turned off. If all or some of the coasters are playing the melody, repeat the

procedure above. If none of the coasters are playing the melody, return all the coasters to

the charging base or plug the power supply. Plug the power supply of the transmitter. The

coasters are ready to receive the page with the out of range feature turned off.

Out of range>OFF

#to turn ON?OFF:

Are All Pagers

Returned ??