Please read these instructions carefully before setting up your Guest Paging System! Guest Paging System LTK-1100 Operating Instructions Questions? Comments? Call 82-32-678-8605 lee technology korea.co.,ltd(LEETEK) #24-2 Samjeong-dong, Ojeong-gu, Puchon-city,Kyunggi-do, Korea www.leetek.org...
Page 2
GuestCall Coaster Paging System Instructions(LTK-1100) Thank you for purchasing the GuestCall Paging System. The most advanced coaster paging system on the market! EQUIPMENT SET_UP LTK-1100/ AC Adapter/Internal Antenna/manual Keypad Sending Unit: Unwrap all sending unit components. Lock the antenna into the hole in the upper right hand corner of the sending unit.
PLACEMENT & MOUNTING INSTRUCTIONS DESKTOP: You can use your transmitter with the 20 degree wedge attached or remove the wedge and lay the transmitter flat. WALL MOUNT To mount your transmitter on a wall: • Remove the plastic bracket (included) under the transmitter unit by unlocking the 2 latches. •...
LTK-1100 allows and PC RS-232C control. Step 1. Power on and entering Address Connect the power Adaptor to AC outlet, and DC out put connector of the Adaptor to LTK-1100 Rear panel DC input connector. When the power is connected to LTK-1100 the system will display the following.
Page 5
Press “# “ to change (AM to PM) Press ENTER SET CURRENT TIME 88:88 AM 2. Set the Sleep Shutdown Time (Factory Default : ON – 1 AM) This system has an “ALL SLEEP” function that turns off all battery pagers (for example, manager pagers)at once automatically.
Page 6
This feature enables your transmitter to send a page, at a preset time, to a certain pager to remind them of a duty required of them. For example, a busser can receive a page every 60 minutes to remind him to check the restrooms. You can assign up to 3 different pagers to be duty alert pagers.
Unplug All Press Enter Coasters Message sent Press Enter Plug in pagers After message is sent, display go to back to Main Menu Press * to scroll Main Menu Menu options TURNING THE OUT OF RANGE OFF • Remove all the coasters from the charging unit or unplug the power supply that is connected to the charging base •...