During The Stimulation Session; Adjusting Stimulation Energies - Compex Sport Elite 2.0 Manual

C
Press the Channel 2 +/- button to select or not the warming-up sequence
(warming-up sequence is activated when the small animated rising
convention symbols above the radiator are visible).
D
Use the Channel 3 +/- button to choose the program difficulty level.
E
Use the Channel 4 +/- button to confirm your choices and launch the program.

DURING THE STIMULATION SESSION

A . ADJUSTING STIMULATION ENERGIES
When you start a program, you will be asked to increase the stimulation energies.
This is critical to the success of any program. To find out what energy level needs
to be reached for each program, refer to the applications menu.
Program time
in minutes and
seconds
The animated
rising convection
symbol represents
the warming-up
sequence
A
Press the On/Off button to place the unit in Pause mode.
B/C/D/E
The Sport Elite "bleeps" and the symbols of the four channels
flash, changing from + to 000: the four channels are at 000 energy
You must increase the stimulation energy so that the stimulation can
start.To do this, press the + buttons for the relevant channels until
the of all four channels simultaneously, press the "i" button, located
below the On/Off button. Press the "i" button twice to increase the
levels in the first 3 channels, and 3 times to increase the levels in the
first 2 channels. When you press the "i" button, the associated
channels are highlighted in white on a black background.
A
B
DEVICE OPERATION
C D
29
Session
progression
scale
See Program
Progession for
more details
E