Connecting The Cables To The Stimulator - Compex Sport Elite 2.0 Manual

ELECTRODE POSITIONS AND TIPS (CONT .)
Clean and degrease the skin with an alcohol swab or cotton ball with alcohol and
then dry it before applying the pads. For hygiene purposes, do not share your
pads with others.
When removing your pads from your skin, peel from the side of the pad. Do
not pull the pad off by the wire. When you store your electrode pads after your
session, make sure to stick them on the transparent plastic film provided. Always
adhere the pad to the "on" side of the film. Place the film with the pads back
inside the plastic bag, squeeze the excess air out of the bag, and then completely
seal it for storage.

CONNECTING THE CABLES TO THE STIMULATOR

The stimulator cables plug into the 4 sockets on the front of the device.
Four cables can be connected simultaneously to the 4 channels of the device.
Both the sockets and the cables are color-coded to simplify use and facilitate
identification of the different channels.
25