It features an AES67 and Dante™ dual-channel audio bridge, adding the capability to accept two channels over a network from Atlona OmniStream™ AV encoders, as well as a Dante or AES67- equipped DSP. The AT-GAIN-NET easily installs into the I/O expansion slot of the Gain 120.
Page 2
WARNING: To prevent the risk of electrocution or electric shock, always disconnect the power cord from the AT-GAIN-120 before installing or removing the AT-GAIN-NET network card. Disconnect the power cord from AT-GAIN-120. Set the AT-GAIN-120 on a flat surface, free of obstructions. Position the AT-GAIN-120 as shown in the picture below.
Page 3
Carefully position the card between the upper and lower rail of each guide, and gently push the AT-GAIN-NET network card forward, until it locks in place. The card will make a small snapping sound, once the card is in place.